Double rotor type taping machine
NWT-70
This device is a high-speed taping machine consisting of two transport rotors.
One machine has two rotors, it is possible to arrange and process multiple vision system inspection and electrical property inspections at high speed.
DOWNLOAD PDF
One machine has two rotors, it is possible to arrange and process multiple vision system inspection and electrical property inspections at high speed.
BASIC SPEC
- Chip size
- 0603～3225
- Weight
- 320kg
- Machine size
- W1100×D900×H1700
- Processing capacity
- Max 5,000pcs/min
- Power
- 3-phase 200V 2.0kW
- Vacuum air
- External vacuum pump included
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 4 check stations can be installed
- Electrical inspection function
- Max 3 check stations can be installed
Square chip component inspection taping machine
NAT-70L
This is a high-speed taping machine that aligns and supplies chips with a parts feeder, and then electrical inspection and vision system inspection using a camera,Insert the good chips into a carrier tape, and sealing them with a cover tape.
Machine designed specifically for 1608 to 3225 chip sizes.
Uses a bowl-type parts feeder Achieves 1.5 times speed of conventional taping machines
DOWNLOAD PDF
Machine designed specifically for 1608 to 3225 chip sizes.
Uses a bowl-type parts feeder Achieves 1.5 times speed of conventional taping machines
BASIC SPEC
- Chip size
- 1608～3225 (Rotor Dia.=Φ070mm）
- Weight
- About 320kg
- Machine size
- W1100×D900×H1700
- Processing capacity
- Max 4,000pcs/min(1608 size chip）
- Power
- 3-phase 200V 2.0kVA
- Vacuum air
- Vacuum pump or piping
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 4 check stations can be installed
- Electrical inspection function
- Max 2 check stations can be installed
- Damage reduction function
- Using piezo actuator
Square chip component inspection taping machine
NAT-70AP
This is a high-speed taping machine that aligns and supplies chips with a parts feeder, and then electrical inspection and vision system inspection using a camera,Insert the good chips into a carrier tape, and sealing them with a cover tape.
This machine specializes in size compatibility, allowing you to efficiently switch between multiple sizes on one machine.
DOWNLOAD PDF
This machine specializes in size compatibility, allowing you to efficiently switch between multiple sizes on one machine.
BASIC SPEC
- Chip size
- 0402～3225 (Rotor Dia.=Φ070mm）
- Weight
- About 300kg
- Machine size
- W1100×D750×H1700
- Processing capacity
- Max 5,000pcs/min
- Power
- 3-phase 200V 2.0kVA
- Vacuum air
- Vacuum pump or piping
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 4 check stations can be installed
- Electrical inspection function
- Max 2 check stations can be installed
- Damage reduction function
- Using piezo actuator
Auto reel changer
NARC-N2
This device is a reel winding machine that automatically processes the carrier tape supplied from the taping machine, cutting it after winding, and attaching the end seal.
It can be used for both large and small diameter reels.
It is possible to stock 20 finished reels, the labeling function can be added as an option.
DOWNLOAD PDF
It can be used for both large and small diameter reels.
It is possible to stock 20 finished reels, the labeling function can be added as an option.
BASIC SPEC
- Weight
- About 150kg
- Machine size
- W1065×D700×H1700
- Processing capacity
- Max 5,000pcs/min
- Power
- Single phase 100V 350VA
- Vacuum air
- Vacuum Generator
- Compressed air
- 0.45MPa
- Carrier tape width
- W4/W8/W12
OPTION SPEC
- Others
- Label attachment function
Auto reel changer
NRC-S
This device is a reel winding machine that automatically processes the carrier tape supplied from the taping machine, cutting it after winding, and attaching the end seal.
Affordable price model for small diameter reels.
It is possible to stock 20 finished reels, the labeling function can be added as an option.
DOWNLOAD PDF
Affordable price model for small diameter reels.
It is possible to stock 20 finished reels, the labeling function can be added as an option.
BASIC SPEC
- Weight
- About 80kg
- Machine size
- W650×D600×H1700
- Processing capacity
- Max 5,000pcs/min
- Power
- Single phase 100V 350VA
- Vacuum air
- Vacuum Generator
- Compressed air
- 0.45MPa
- Carrier Tape Width
- W4/W8
OPTION SPEC
- Others
- Label attachment function
Measuring and sorting taping machine
NAIT-100
This is a measuring and sorting taping machine that aligns and supplies chips with a parts feeder, and then electrical inspection and vision system inspection using a camera,Insert the good chips into a carrier tape, and sealing them with a cover tape.
There is a high degree of freedom in unit placement, and allowing up 5 check units can be placed.
DOWNLOAD PDF
There is a high degree of freedom in unit placement, and allowing up 5 check units can be placed.
BASIC SPEC
- Chip size
- 0402～3225 (Rotor Dia.=Φ100mm）
- Weight
- About 350kg
- Machine size
- W1200×D920×H2000
- Processing capacity
- Max 3,000pcs/min
- Power
- 3-phase 200V2.0kVA PC system: Single-phase 100V
- Vacuum air
- Vacuum pump or piping
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 4 check stations can be installed
- Electrical inspection function
- Max 5 check stations can be installed
- Damage reduction function
- Using piezo actuator
Measuring and sorting taping machine
NBT-70
This is a measuring and sorting taping machine that aligns and supplies chips with a parts feeder, and then electrical inspection and vision system inspection using a camera,Insert the good chips into a carrier tape, and sealing them with a cover tape.
There is a high degree of freedom in unit placement, and allowing up 4 check units can be placed.
DOWNLOAD PDF
There is a high degree of freedom in unit placement, and allowing up 4 check units can be placed.
BASIC SPEC
- Chip size
- 0402～3225 (Rotor Dia.=Φ070mm）
- Weight
- About 300kg
- Machine size
- W1200×D850×H1800
- Processing capacity
- Max 3,000pcs/min
- Power
- 3-phase 200V2.0kVA PC system: Single-phase 100V
- Vacuum air
- Vacuum pump or piping
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 3 check stations can be installed
- Electrical inspection function
- Max 4 check stations can be installed
- Damage reduction function
- Using piezo actuator
Hanging Type Taping Machine
SRT-18H
This is a hanging type taping machine that can handle a wide variety of chips.
That performs electrical measurements and 6-side vision system inspection, and then insert the good chips into a carrier tape, and sealing them with a cover tape.
One machine can handle multiple products, so it is compact and No need much space.
DOWNLOAD PDF
That performs electrical measurements and 6-side vision system inspection, and then insert the good chips into a carrier tape, and sealing them with a cover tape.
One machine can handle multiple products, so it is compact and No need much space.
BASIC SPEC
- Chip size
- 0603～6432（Nozzle PCD＝180mm）
- Weight
- About 450kg
- Machine size
- W1000×D550×H1600
- Processing capacity
- Max 1,000pcs/min
- Power
- 3-phase 200V 2.0kVA
- Vacuum air
- External vacuum pump included
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 6 check stations can be installed
- Electrical inspection function
- Only 1check stations can be installed
Hanging Type Taping Machine
SRT-30H
This is a hanging type taping machine that can handle a wide variety of chips.
That performs electrical measurements and 6-side vision system inspection, and then insert the good chips into a carrier tape, and sealing them with a cover tape.
One machine can handle multiple products, so it is compact and No need much space.
DOWNLOAD PDF
That performs electrical measurements and 6-side vision system inspection, and then insert the good chips into a carrier tape, and sealing them with a cover tape.
One machine can handle multiple products, so it is compact and No need much space.
BASIC SPEC
- Chip size
- 0603～6432（Nozzle PCD＝300mm）
- Weight
- About 700kg
- Machine size
- W1500×D1100×H2400
- Processing capacity
- Max 1,000pcs/min
- Power
- 3-phase 200V 2.0kVA
- Vacuum air
- External vacuum pump or piping
- Compressed air
- 0.45MPa
OPTION SPEC
- Vision system inspection function
- Max 6 check stations can be installed
- Electrical inspection function
- Max 13 check stations can be installed
Desktop manual taping machine
NET-3200L
This is a tabletop taping machine that inserts chips into a carrier tape By hand, automatically counts, seals them with a cover tape, and winds them up.
It can be used immediately with only a 100V power supply.
Its simple design makes it suitable for creating sample reels.
DOWNLOAD PDF
It can be used immediately with only a 100V power supply.
Its simple design makes it suitable for creating sample reels.
BASIC SPEC
- Chip size
- 0402～5750
- Weight
- About 20kg
- Machine size
- W1100×D400×H600
- Power
- Single phase 100V
- Vacuum air
- No need
- Compressed air
- No need
OPTION SPEC
Probe pin grinding machine
NTG-002
This device is a simple tabletop grinder that sets worn measuring pins in a holder and grinds the tip with a grindstone.
By setting the angle of the grindstone as desired, the tip shape can be adjusted to various shapes.
DOWNLOAD PDF
By setting the angle of the grindstone as desired, the tip shape can be adjusted to various shapes.
BASIC SPEC
- Weight
- About 15kg
- Power
- Single phase 100V
- Vacuum air
- No need
- Compressed air
- No need
- Equipment size<br />
- W250×D220×H430 (H140 without microscope)
