本文へスキップ
イメージ写真2

PRODUCTS FEATURES:

Chip type capacitors and all other leadless devices have boosted up the reduction in size and weight and the prevalence as well of all kinds of such information gadgets as tablet terminals, notebook pc and handy phones.
Our company develops and manufactures the taping machines indispensable to produce chip type devices, and the mounting machine as well to mount such devices.
Among such machines, the high-speed taping machine NAT-2000 Series is highly appreciated in the world, enabling high-speed, high efficiency and labor saving operations.

TAPING MACHINES
New Rerease NEXT GENERATION HIGH SPEED CHIP TESTING AND TAPING MACHINES


Any inquiries may be sent to us from this page.
写真 HIGH SPEED CHIP TESTING AND TAPING MACHINE
NAT-2000
This machine is ahigh speed chip testing and taping machine equipped with a parts feeder, which aligns and supplies rectangular chip capacitors, sorting them and inserting only qualified products to the cavities of carrier tape which is then sealed with cover tape and is wound around a reel.

    Features:
    ・Capable of sorting and taping components at 2000pcs per minute.
    ・Original method is used so as not to give damages to products.
    ・Long hour unmanned operation is possible by adopting
     traversing reeling system as the standard.
    ・Space saving design is adopted so as to house carrier tapes
     within the current external dimensions.
写真 CHIP COMPONENTS TESTING AND TAPING MACHINE
AIT-800CI
This machine tests electrical performances of various kinds of rectangular chip coponents (thermistors, inductors, coils, e.t.c.), and inserts only qualified products onto tape, and winds it on reel.

    Features:
    ・Applicable to such kinds of chip components as inductors, coils, and
     thermistors for measuring and taping.
    ・Image sensing system, reversing and sorting functions are available as
     options so as to meet various requirements.
    ・Products are not damaged due to the air controlled taping system, good
     tresults of which have been proved by the Nitto's best selling machine
     ACT-1200.
写真 IC EMBOSS TAPING MACHINE TRAY SUPPLY TYPE
ACT-120T
This machine performs the ordering of devise in upper tray, thermal sealing of cover tape and the winding on the reel.

    Features:
    ・High speed taping tact = Max. 0.5 sec./device
    ・Adopts one touch operation everywhere there.
    ・The width of tape is up to 4 kinds. Recording is possible.
    ・Due to NITTO KOGYO's development of the floating seal mechanism, the
     levelling/adjusting of heater iron can be done in a short time.
    ・Changing tape width requires only wrench to adjust heater iron.
     With its economical design, it does not require expensive changing.
写真 SIMPLIFIED EMBOSS TAPING MACHINE
NET-3000L
This machine is a semi-automatic taping machine which manually inserts chip components, automatically counts them numerically, seals cover tape, and then reels it.

    Features:
    ・Size change is available with one-touch sense.
    ・Parallel adjustment of heater iron is not required due to the
     employment of a new floating method.
    ・As control section and working plate are separable respectively,
     it makes modification to in-line and automation to be easily
     performed.
    ・Operation panel designed to be used easily through interactive
     operation messages, error processing and I/O check function,
     etc. with LCD display.
写真 TAPING MACHINE VARIOUS KINDS OF CHIP SHAPED DEVICES.
ACT-390
This machine flexibly supports the taping of chips having various shapes, and is possible to be equipped with image processing and electrical inspection capabilities.

    Features:
    ・High-speed taping tact of maximum 500 pieces/minutes.
    ・Setup time is reduced. Different thicknesses can be met automatically.
    ・Maximum 5 different thicknesses can be registered.
MOUNTERS
写真 MULTI-MOUNTER
STM-Y3
STM-YIII is a multi-mounting machine for automatically placing small-type chip components (in bulk supply) onto printed circuit board simultaneously.
This machine is especially suited for mass production of small to medium size PCB.

    Features:
    ・Cost reduction in chip components through bulk supply.
    ・Greater throughput compared to general single-mounting machines.
    ・Simple configuration; easier operation and changeover.
    ・Flexible configuration to accommodate a variety of production types.
    ・High effieciency rate through autor recovery function.

The use of bulk supply allows reduction to as much as 1/20th in component packaging thereby realizing greater control over handling, distribution, and warehousing requirements.
写真 BULK FEEDER MOUNTER
STM-20BF
This machine has capability of bulk cassette used exclusively for bulk (bulk packaging)

    Features:
    ・As this head provides four chutes to keep chip components on
    mounting head up to maximum 20pcs and has capability of suction in
    one lot from feeder, a mounting tact is reducible and a high precise
    placement is available regardless of mechanical centering design.
    ・Even a compact machine makes it possible to form an in-line with
    relative machines and to offer a low price.
写真 TAPE FEEDER MOUNTER
STM-20TP
For all compactness of the machine, the standard provision of two cameras and the correction of board and component make a high precise placement possible.

    Features:
    ・Head section provides three nozzles, thereby tact reduction mounting
     of a wide kind of components being possible.
    ・This equipment corresponds to taping components with 8mm to 32mm
     width and has capability of tape feeder mountable up to maximum
     20 pcs and also simultaneously replaceable.
    ・Even a compact machine makes it possible to make an in-line with
     relative machines and to offer a low price.
写真 QFP MOUNTER
STM-20FP
This machine provides two sets of high resolution cameras for standard and is capable of image-processing both of board and components, thereby accurate mounting is available.

    Features:
    ・The packages of tray tape etc. can be handled and a wide range of
     components up to 50mm size will be applied.
    ・This machine corresponds to taping components with 8mm to 32mm
     width and has a capability of tape feeder mountable up to maximum
     15 pcs and also simultaneously replaceable. This equipment is designed
     to have three nozzles per one head, thereby high speed mounting is
     achieved.
写真 BULK CASSETTE
NM-U
The NMII Bulk Cassette is a result of long years of development that has received wide acclaim as a bulk feeder for its superior air flow design, regarded as a global standard in bulk supply design, and provided as OEM supply to various mounter equipment manufacturers.

    Features:
    ・Simple construction, easy handling.
    ・High reliability aqnd stable feeding
    ・Easy installation of auxilliary devices on the main body
    ・Scratch or damage to chip component eliminated
    ・Compact size, requires less space for installation.
TERMINATION MACHINES
写真 AUTOMATIC SILVER ELECTRODE TERMINATION MACHINE
CCR-120
This is an automatic machine which is capable of performing a series of operations of 1) taking out one by one sheet from a specially designed magazine, accommodating piled substrates like sheet for forming electrode on theend of chip resistor, 2) breaking of pieces, 3) releasing white edge, 4) coating on it's end, 5) drying and 6) ejecting in arrangement.

    Features:
    ・CAPACITY -- After first breaking, 18 pieces will be processed
     at the same time in order to realize high speed processing of
     120 pieces per minute.
    ・FIRST BREAKING -- The adjustment for breaking can be done
     by air pressure and stroke of air cylinder.
    ・COATING METHOD -- Processing capacity is enhanced by coating
    18 pieces of the same time. Therefore stability and reliability of coating
    are available.
写真 2ND BREAKING MACHINE
CBM-120
This machine comprises picking up the strips of flat chip resistors from a conveying mesh belt passing through after the end sides of the strips have been coated with silver electrodes.
Then, the strips are placed on top of the conveyor belt which carries them to the breaking section.
Individual chips and white ear parts (unprinted and portion of strip) which are made out from broken strips fall into two layers of vibrating sieves which separate them apart.
One box exclusively for chips and another box exclusively for white ears are provided to accommodate them separately.

    Features:
    ・By virtue of the in-line configuration, the machine can be
     connected directly to the exit side of the furnace. This feature
     lessens the damage resulting from broken boards, and does not
     require too much space for setting up the machine. Furthermore,
     it saves manpower for the post-processes of manufacturing:
    ・High speed processing of 150 pieces of broken boards (strips) in
     case of one unit of CBM-120.
写真 DESKTOP-TYPE SECONDARY CUTTING MACHINE
SBU-120
This machine breaks the primary cut strip substrates into individual chips and peripheral portions, and puts them in box.

    Features:
    ・Applicable to chip resistor substrates.
    ・Applicable to the substrates for 1005, 1608, 2102.
写真 HEATING FURNACES
NITTO KOGYO provides various kinds of furnaces, muffle or muffleless types, to be used for baking chip resistors and thick film IC resistor circuitries.

    Features:
    ・Applicable to chip resistors, chip inductors, e.t.c.
    ・Applicable to the substrates of 200-800□
写真 HIGH SPEED MIXING MACHINE FOR RESIN AND PASTE
SNB Series
This machine can mix and de-bubble resin in liquid and powder in short time.

    Features:
    ・Applicable to paste and resin.
    ・Processable volume:
     SNB-350:400CC, SNB-550:1000CC, SNB-2000:2000CC
OTHER MACHINES
写真 BULK CASE REFILLING MACHINE
NRTB-2000
This machine, equipped with a parts feeder aligning and supplying rectangular chip components, packages sorted qualified products in the bulk case in certain set numbers.

    Features:
    ・Applicable to chip resistor, chip capacitor, chip thermister, chip inductor, e.t.c.
    ・Processable Max.2000pcs per minute.(0.03sec./pc)
    ・Designed as compact space saving, yet high speed stable operation.
    ・Possible to flexibly put in empty bulk case, and to take out filled bulk case.
写真 FORWARDING MACHINE FOR RESISTOR NETWORKS
FLI-200E
This machine is for cutting substrates in line with the slits, inserts cut pieces to leadframe, and then cuts out excessive pins.

    Features:
    ・Applicable to resistor networks, high voltage resistors, e.t.c.
    ・Processable volume is Max.200pcs./minute.(0.3sec./pc)
写真 CHIP COMPONENTS TESTING & STICK PACKAGING MACHINE
TM-100
This machine receives components packaged in a form of radial taping from former process, cuts them out, and sorts, and then, laser marks the only qualified parts and packages them, in upright stick arrangements.

    Features:
    ・Applicable to diodes, transistors, e.t.c.
    ・Capable of processing Max.100pcs per minute.(0.6sec./pc)
    ・Possible to arrange in line with former process.
写真 CHIP COMPONENTS TESTING AND TAPING MACHINE
TTS-200
This machine feeds components radially taped in reel, cuts them out, and sorts, and then tapes only qualified components.

    Features:
    ・Applicable to diodes, transistors, e.t.c.
    ・Capable of processing Max.200pcs per minute.(0.3sec./pc)
    ・Possible to arrange in line with former process.
写真 TAPE TO TAPE AUTOMATIC TAPING MACHINE
ACT-240T2C
This machine feeds taped components peeling off the cover tape, and then sorts and tapes only qualified products.

    Features:
    ・Applicable to tantalum capacitors, e.t.c.(3216,3528,e.t.c.)
    ・Capable of processing Max.120pcs per minute.(0.5sec./pc)
    ・Producivity is improved by adopting a series of 5 tape cassettes.
写真 TWIN-LINEAR FEEDER
PARTS FEEDER
Parts Feeder for chip type components being capable of simple and high-speed stable feed.

    Features:
    ・Joint line not exists, as directly connected to the linear feeder
    ・Small footprint (a half size of ball feeder.)
    ・Short carrier distance (a quarter of ball feeder)
    ・Maximum feeding capability: 4000pieces/minute (1005C)
    ・Residual chips are limited.
    ・High cost performance.
DEVELOPMENT OF SPECIAL SPECS AND MACHINES, MEETING CUSTOMER NEEDS

  • Spot welding machine for various kinds of electronics leaded devices.
  • Supply liner and lead wire, welding lead wire on liner ends, then forming lead wire to make hoop terminals.
  • The machine to test, sort and tape piezoelectric chip components as vibrators(buzzer), chip coils,transmitters.
  • The machine to put various kinds of laser markings on components.
  • The machine to test and tape after aligning precisely the multi-terminals of arrayed resistors and capacitors and mixedly-arranged resistors and capacitors.
  • The machine to test various performances of chip capacitors, and to insert them onto tape.
  • Taping machine using platforms confonforming to the configurations and measuring conditions of chip capacitors.
  • The machine automatically winds up the carrier tape being forwarded from taping machine to either large or small reels, cuts it and then puts end-sealing tape on it.
  • Others・・・

Other than the above standardized machines, NITTO KOGYO is developing and providing many kinds of special chip taping machines, sorting machines, measuring machines, mounters, e.t.c. related to chip components.

Please talk with NITTO KOGYO's sales persons for your requirements. Any inquiries concerning the products may be sent to us from this page.